Do treści strony

Harley Benton Parts Fabric Single Coil Cable

4.7 na 5 gwiazdek z 98 ocen klientów

Cable for Single Coil Pickup

  • Length: 1 m
  • With white vintage style fabric coat
  • Produkt dostępny od Luty 2018
  • Numer artykułu 423215
  • Jednostka sprzedaży 1 szt.
10,50 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

98 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

50 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
c
Vintage Vibe
chaosepher 31.03.2021
Nice feeling and looking cables for that clean and vitnage style soldering.
These are high quality cables, and i prefer this wax/cloth over the plastic coating. It rolles back and gives you clean soldering (without melting plastic) and it closes the gaps of exposed wire nicely.

Good value, Good sound, nice feel to work with
No cons.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
a
Nice cable
avokado64 30.11.2021
Does the job. Hard feeling but it makes it easier for me to set it up.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
It does the job.
Gatdoc 11.10.2018
Not pre-tinned like I am used to and very white (but hidden from view most of the time, so who cares). Not being pre-tinned means they are not pushback compatible...you have to cut around with a sharp knife and pull the end off. Fiddly at best for tired old eyes and hands. I will look further.
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
NM
Good
Natalia Markevich 24.01.2025
I haven't soldered it yet. But it feels like a good cable in my hands. The conductor cross-section is about 0.7 mm. Good braiding, easy to move.

Thomann - But why twist the ends of the cable like that, by the rolled-up cable??
There are special packaging clamps for this!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie