Do treści strony

Gravity SF 36 M 10 M Reducer Flange

4.9 na 5 gwiazdek z 112 ocen klientów

Kołnierz redukcyjny

  • Z 36 mm na gwint M10
  • Gwint M10 x 18 mm
  • Długość: 100 mm
  • Nadaje się do rur o średnicy 35 mm
  • Materiał: stal
  • Lakierowanie na czarno
  • Ze śrubą blokującą
  • Produkt dostępny od Marzec 2018
  • Numer artykułu 434807
  • Jednostka sprzedaży 1 szt.
  • Type Tripod Sleeve
  • Diameter of bolt/flange socket bigger side 36 mm flange socket
  • Diameter of bolt/flange socket smaller side not existing
  • Thread bigger side M10 male
  • Thread smaller side not existing
55 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

112 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

55 Opinie

A
pasuje idealnie
ArBuZo 24.04.2025
super montaż, minusem brak podkładki pod motylkiem
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

J
Polecam
JaKuba 13.04.2025
Dobrze wykonane i bardzo ułatwia pracę. Przestawiłem się na statywy firmy Gravity i nie żałuje!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
FD
It works well
Fantasy Discos 11.10.2020
I use it to mount an ADJ H2O IR light onto a standard speaker stand. This mount is easy to use and very good quality. The only negative with this is that it didn't come with 2 metal washers that go in between the lights bracket when mounting. Not an issue as I provided my own.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Well made and exactly what I needed!
Ric_YI 25.12.2021
I use this to mount moving lights on top of stands and it has held up really well over the last 3 years playing shows. The only down side is if you have cheap stands it will bend the metal if tightened too hard and subsequently the light will wobble side to side if knocked.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie